Archive

Posts Tagged ‘cmd’

CMD line: add domain to local intranet zone


A quick way to add domains to a computers Local intranet zone is to run the following regs in cmd. No Admin rights needed.

REG ADD “HKCU\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings\ZoneMap\Domains\office.com ” /v https /t REG_DWORD /d 1 /f
REG ADD “HKCU\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings\ZoneMap\Domains\microsoftonline.com ” /v https /t REG_DWORD /d 1 /f

Tags: , ,

Configure DHCP server with cmd or powershell


I wanted to share real quick how you set up and configure a DHCP server on Windows Server 2008 R2 or 2012 (R2) with he command line or powershell.

Windows Server 2008 R2:
Let’s begin with Windows Server 2008 R2, which doesn’t have any dhcp cmdlets in powershell so we have to mostly stick to the commandline.

To install the DHCP role, open an elevated powershell window:
Import-module ServerManager
Add-windowsfeature -Name DHCP

Note that the DHCP Server service is installed but stopped and disabled. Now we have to go to an elevated command prompt for the rest.To set the service to automatic startup and start the service.
sc config dhcpserver start= auto
net start dhcpserver

Authorize the server in AD:
netsh dhcp add server Server1.dhcplab.local 10.11.12.11

Create a scope, which is empty
netsh dhcp server add scope 10.11.12.0 255.255.255.0 "Scope1"

Add a range of IP addresses for leasing
netsh dhcp server scope 10.11.12.0 add iprange 10.11.12.101 10.11.12.200

Set the default gateway option
netsh dhcp server scope 10.11.12.0 set optionvalue 003 IPADDRESS 10.11.12.254

Set the lease time in seconds
netsh dhcp server scope 10.11.12.0 set optionvalue 51 DWORD 28800

Set the DNS server
netsh dhcp server scope 10.11.12.0 set optionvalue 006 IPADDRESS 10.11.12.1

Add a DHCP reservation, for a printer in this case
netsh dhcp server scope 10.11.12.0 add reservedip 10.11.12.190 A1B2C3D4E5F6 "Printer1" "Reservation for Printer1"

Windows Server 2012
Everything in an elevated powershell window. How sweet it is! 🙂

Install the DHCP Role (no need to configure the service afterwards)
add-windowsfeature -Name DHCP -includemanagementtools

Authorize the DHCP server
Add-DhcpServerInDC

Add scope with IP range for leasing
Add-DhcpServerv4Scope -Name "Scope2" -StartRange 10.11.12.101 -EndRange 10.11.12.200 -SubnetMask 255.255.255.0

Set lease duration (days.hours:minutes:seconds)
Set-DhcpServerv4Scope -ScopeId 10.11.12.0 -LeaseDuration 1.00:00:00

Set default gateway
Set-DhcpServerv4OptionValue -ScopeId 10.11.12.0 -Router 10.11.12.254

Set dns server and domain name
Set-DhcpServerv4OptionValue -DnsServer 10.11.12.1 -DnsDomain dhcplab.local

Set IP reservation, again for a printer
Add-DhcpServerv4Reservation -ScopeId 10.11.12.0 -IPAddress 10.11.12.190 -ClientId A1-B2-C3-D4-E5-F6 -Description "Reservation for Printer1" -Name "Printer1"

SCCM: How to find computer model in commandline

November 26, 2012 Leave a comment

To retrive the Computer model from commandline use the following command:

wmic csproduct get name

This is usefull when you are making model specified driverpacks i System Center Configuration Manager task sequence.

there is several wmic commands that you can use, for example to retrive serial number use this:

wmic bios get serialnumber
Tags: , ,
%d bloggers like this: